A 16-channel logic analyzer on USB 3. It runs from one USB-C cable on a computer, or sits on a Raspberry Pi 4 or 5 as a HAT+.
First-batch price, one time only. The first four boards are $99. After that the board is $149.
Ships in the United States only. Shipping and any sales tax are added at checkout. Payment is taken by Stripe: this site never sees your card.
The trigger runs on every sample at the full rate: edges, levels, pulses by their length and levels that have lasted, with up to four stages in turn. A trigger input lets another instrument start the capture.
Each channel has a glitch filter up to 1.25 µs in 5 ns steps, and a capture can sample on your circuit's own clock up to 50 MHz.
Samples go to the host over USB 3 as they are taken, so a capture's length is set by the host's memory. The longest capture so far is 600 million samples.
All 16 channels stream at 100 MS/s for any signal, and at 200 MS/s for signals that change in up to 96 million samples a second.
Opens in your browser: waveforms, a threshold for each pod, the trigger, and decoders for I²C, SPI and serial that it can find by itself.
Capture to a file for PulseView, a waveform viewer or a spreadsheet. Run any of sigrok's decoders on a capture. Commands print JSON for scripts.
An agent can use the board by itself, through the command line with a skill file or through a Model Context Protocol server.
# Check the computer and the board ./logicboole check # Wait for B0 to fall, and keep the millisecond after it ./logicboole capture reset.sr --rate 200M --time 1ms --trigger "B0=f" # What a protocol decoder finds in a saved capture ./logicboole decode bus.lb16 i2c scl=A1 sda=A0

| Channels | 16 digital, in two pods of 8 |
|---|---|
| Sample rate | 200 MS/s, or 200 MS/s divided by a whole number |
| Streaming, USB 3 | Raw: 16 channels at 100 MS/s, any signal. Run-length: 16 channels at 200 MS/s, for signals that change in up to 96 million samples a second |
| Fastest signal | Clocks up to 85 MHz, pulses down to 6 ns |
| Before the trigger | The newest 8184 words: 16,368 samples in the raw format |
| Trigger header | TRIG IN, and TRIG OUT 75 to 80 ns after the trigger sample |
| Glitch filter | For each channel, from off to 1.25 µs in 5 ns steps |
| Capture clock | The circuit's own clock, up to 50 MHz |
| Logic levels | 1.2 to 5 V |
|---|---|
| Thresholds | 0.3 to 3.0 V in 0.75 mV steps, one for each pod |
| Channel skew | 1.4 ns between the earliest and the latest of the 16 inputs of one board |
| Maximum input | ±25 V |
| Host link | USB-C. USB 3 at 5 Gbit/s; USB 2.0 works and carries a ninth as much |
| Power | 5 V from USB-C or the Pi's header, about 1 W |
| Main parts | Spartan-6 XC6SLX9 FPGA, Infineon EZ-USB FX3, 16 fast comparators |
| Size | 82 × 86 mm, four layers, parts on the top side only |
One repository holds the whole of board revision C: the KiCad project and the files the boards were made from, the FPGA design in Verilog with its test benches, the firmware's source, and the host software.
The board keeps no firmware. The host loads it each time it connects, so nothing you load can brick it.
Read before you power a board from a laptop.
Note 13 · PowerSix parts that store charge, each running the same load.
Note 47 · HistoryThe connector every kit here plugs into.